Prusaslicer Profile for BIQU BX
 
Avisos
Vaciar todo

Prusaslicer Profile for BIQU BX  

Página 2 / 2
  RSS
BUNNFRED
(@bunnfred)
New Member
RE: Prusaslicer Profile for BIQU BX

Sounds good, my profile does not work at all.

Would you share your working profile?

 

Respondido : 09/04/2022 7:19 pm
rubino25
(@rubino25)
Active Member
RE: Prusaslicer Profile for BIQU BX

That's the updated start Gcode:

;PRINT_START NOZZLE=[first_layer_temperature] BED=[bed_temperature]
SET_PIN PIN=screen VALUE=1
SET_LED LED=led BLUE=0.0 RED=1.0 GREEN=0.0
M117 Heating Bed and Nozzle
M190 S[bed_temperature]
M109 S[first_layer_temperature]
SET_LED LED=led BLUE=0 RED=0 GREEN=1
G28
SET_LED LED=led BLUE=1 RED=0 GREEN=0
BED_MESH_CALIBRATE
BED_MESH_PROFILE LOAD=default
M105
G90 ;Ensure we are in absolute mode
G21
M83 ;Set the extruder to relative mode
G92 E0
G0 X2 Y0 F6000
G0 Z0.4
M105 ;report temperature
M117 Printing
G1 X120 E30 F1200
G92 E0
G0 F9000
G90 ;Set back to Absolute mode
SET_LED LED=led BLUE=0 RED=0 GREEN=0
SET_PIN PIN=screen VALUE=0
Respondido : 10/04/2022 9:31 am
Bratinm
(@bratinm)
New Member
RE: Prusaslicer Profile for BIQU BX

Can you please share a PrusaSlicer profile for BiQU B1 printer?

Respondido : 19/05/2022 6:30 pm
Athruz
(@athruz)
Eminent Member
RE: Prusaslicer Profile for BIQU BX

BIQU BX

Here is what I have. Worked it a bit recently trying out the Super Slicer. Seems to work fine but just started using it so might need some adjustments. Includes the models for the custom bed files as well. 

Respondido : 17/09/2022 6:45 pm
critter42
(@critter42)
Active Member
RE: Prusaslicer Profile for BIQU BX

That profile will not work in PrusaSlicer. When I try to import there are numerous errors regarding perimeter extrusion width settings - and when I look in the .ini file, all the lines it complains about have no value. I tried just commenting them out, as I had no idea what they were supposed to be, and now I get errors trying to slice w/supports enabled.

Respondido : 24/10/2022 6:54 am
abuus
(@abuus)
Miembro
RE: Prusaslicer Profile for BIQU BX

Is there any progress in the profile because I am seeking as well for it.

greets ; abuus

Respondido : 13/12/2023 10:23 am
Página 2 / 2
Compartir: