RE: Prusaslicer Profile for BIQU BX
Sounds good, my profile does not work at all.
Would you share your working profile?
RE: Prusaslicer Profile for BIQU BX
That's the updated start Gcode:
;PRINT_START NOZZLE=[first_layer_temperature] BED=[bed_temperature] SET_PIN PIN=screen VALUE=1 SET_LED LED=led BLUE=0.0 RED=1.0 GREEN=0.0 M117 Heating Bed and Nozzle M190 S[bed_temperature] M109 S[first_layer_temperature] SET_LED LED=led BLUE=0 RED=0 GREEN=1 G28 SET_LED LED=led BLUE=1 RED=0 GREEN=0 BED_MESH_CALIBRATE BED_MESH_PROFILE LOAD=default M105 G90 ;Ensure we are in absolute mode G21 M83 ;Set the extruder to relative mode G92 E0 G0 X2 Y0 F6000 G0 Z0.4 M105 ;report temperature M117 Printing G1 X120 E30 F1200 G92 E0 G0 F9000 G90 ;Set back to Absolute mode SET_LED LED=led BLUE=0 RED=0 GREEN=0 SET_PIN PIN=screen VALUE=0
RE: Prusaslicer Profile for BIQU BX
Can you please share a PrusaSlicer profile for BiQU B1 printer?
RE: Prusaslicer Profile for BIQU BX
Here is what I have. Worked it a bit recently trying out the Super Slicer. Seems to work fine but just started using it so might need some adjustments. Includes the models for the custom bed files as well.
RE: Prusaslicer Profile for BIQU BX
That profile will not work in PrusaSlicer. When I try to import there are numerous errors regarding perimeter extrusion width settings - and when I look in the .ini file, all the lines it complains about have no value. I tried just commenting them out, as I had no idea what they were supposed to be, and now I get errors trying to slice w/supports enabled.
RE: Prusaslicer Profile for BIQU BX
Is there any progress in the profile because I am seeking as well for it.
greets ; abuus