printing error
Hi. i have diy 3d printer. i like the prusaslicer a lot because is easy to use.
The problem is what i put in the slicer and what the printer prints is 90% but only on this part design.
https://drive.google.com/file/d/1fQQLV5jzmcolEDObZRxGE18v3jNEURBQ/view?usp=sharing
in the picture the skirt should be bigger at bottom but it is missing it. and when it is finished the skirt and does the first layer the x axis just stay inactive and only the y is moving , only after some time the x moves.and it print the rest.
https://drive.google.com/file/d/1Nw_shRIuNVKb1MCW8dUllfitynuucwln/view?usp=sharing
Can someone explain how i am missing the rest of the part. other part works great.with no error.
RE: printing error
i did another print with a different part but the same thing is happening.
to this
RE: printing error
ok. i found the problem. the bed size in the marlin firmware does not match with slicer.
RE: printing error
@yuuki-1942
Thanks Yuuki,
I looked at your 3mf file and it looked fine in my Prusa slicer,
was your Printbed bigger than Marlin was expecting?
regards Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK