Notifications
Clear all
Changing Extrusion Multiplier during a Filament Swap
So I'll be completing a series of prints soon where I will need to swap filaments midway, but the two filaments I'm using have very different extrusion multipliers (.93 and 1.03). To get the best results, I'm assuming I have to enter custom gcode to change both the filament and the extrusion multiplier. Would it look something like:
- M221 S103
- M600
Then the print would continue. Is that right, too simple, or wrong altogether? Thanks for any help!
Posted : 17/10/2023 4:10 pm