Benachrichtigungen
Alles löschen
load cell error
In the middle of an 8-hour print, I got a load cell error. The printer has been running hours at a time before this with no issues. Now, the load cell calibration fails. I either get a message telling me that the load cell data is too noisy, or it doesn't detect me tapping the nozzle.
Veröffentlicht : 18/01/2026 3:04 pm
RE:
Is the nozzle fully seated and tight?
https://help.prusa3d.com/article/loadcell-troubleshooting_815397
Veröffentlicht : 18/01/2026 3:36 pm
RE: load cell error
Use this link, not the other one.
Veröffentlicht : 18/01/2026 3:44 pm
1 weiteren Personen gefällt das
Themenstarter answered:
RE: load cell error
The nozzle cleaning article solved my problem. Thanks!!!
Veröffentlicht : 30/01/2026 3:55 pm
2 weiteren Personen gefällt das
RE: load cell error
I really recommend something like this in the filament, especially in the workshop with woodworks https://www.printables.com/model/43403-filament-dust-filter-parametric
See my GitHub and printables.com for some 3d stuff that you may like.
Veröffentlicht : 31/01/2026 10:56 pm