PRUSAment PET-G for PPE
Ordered Prusament PETG Orange for PPE some time ago and used it now for laboratory equipment. Printed the Eppendorf Block with Pla first. Result was A-OK no Problems as usual.
Now I tried to print it with the PRUSAment PetG for PPE and quality was bad, as see in the pictures
Maybe the print speed was to high for this material as it is not as perfect as normal PRUSAment PetG?
Sascha
RE: PRUSAment PET-G for PPE
This looks like a partial clog. Make sure you keep the filament dry. I would put the PETG in a filament dryer for 6-8 hrs and try again.
If you are printing anything that will be used in a lab environment, especially around chemicals you should be using PP (polypropylene) such as PP-CF or PP-GF instead.
RE: PRUSAment PET-G for PPE
👍 👍Thank you, just started drying and will reprint it tomorrow