Notifications
Clear all
Noise and Stepper Ratrle
Not quite been a year with the CoreOne. Noise and stepper rattling. I tried the adjustment tool a while back and it helped for a little while, but now this. Would appreciate any suggestions:
https://youtube.com/shorts/k1-TtmtXQCc?si=CA_4ZtEE74JWZItw
Publié : 18/05/2026 8:38 pm
RE: Noise and Stepper Ratrle
Well, could try taking a small bit of general purpose machine oil on a paper towel and LIGHTLY wipe down the threaded rods and check.
Shane (AKA FromPrusa)
Publié : 19/05/2026 1:29 am
RE: Noise and Stepper Ratrle
Definitely that- I've never been a fan of grease on the threaded rods. A thin film of Prusa grease on the smooth rods might also be a good idea.
Publié : 19/05/2026 4:20 am