[Solved] Bed Leveling Failed on CoreONE upgrade

Stránka 3 / 3 Předchozí

Poslední Příspěvek

RSS

StanleyB

(@stanleyb)

Active Member

RE: Bed Leveling Failed on CoreONE upgrade

I'll suggest one more thing: sometimes it's worth switching to manual Z-axis movement and going all the way down to Z=275. If the motors whine, it means the bed has mechanically leveled. Maybe this will help someone.

Napsal : 09/01/2026 11:22 pm

hyiger

(@hyiger)

Noble Member

RE: Bed Leveling Failed on CoreONE upgrade

Posted by: @stanleyb

I'll suggest one more thing: sometimes it's worth switching to manual Z-axis movement and going all the way down to Z=275. If the motors whine, it means the bed has mechanically leveled. Maybe this will help someone.

Or just run Z Alignment Calibration from the UI.

Napsal : 09/01/2026 11:54 pm

Stránka 3 / 3 Předchozí

Fórum Statistiky

595 Fóra

69.9 K Témata

489.6 K Příspěvky

14 Online

80.7 K Uživatelé

Poslední Příspěvek: After Core One + upgrade to Core one filament will not pass new assembly Nový Uživatel: SciPrint Recent Posts Unread Posts Tags

Forum Icons: Forum contains no unread posts Forum contains unread posts

Topic Icons: Not Replied Replied Active Hot Sticky Unapproved Solved Private Closed