Prusalink
Around 9/5 - 9/6 Prusa connect came up with a warning about technical issues. By 9/7 the warning disappeared. Subsequent to that, my MK3S+ stopped initiating Prusalink. The rPi boos. I can see it in my gateway's list of devices. I have taken out the raspberry pi card and removed the mini SD, reflashed it with the Prusa OS, re-installed card. I've doubt checked the rPi is On. I also installed the latest printer firmware 3.13.1. Still, Prusalink won't start even after a half hour of letting the LCD screen show the "Starting Prusalink" message. I went back to my previous firmware 3.12.2. Still no prusalink.
I contact Prusa via chat and email. Have not gotten an answer or a suggestion of how to fix it that work. The chat session suggested I reflash my SD card, which I did as explained above. I've searched the forum for anyone with similar issue. Found no one, so I started this topic.
I also checked GitHub to determine that I have the most recent Prusa OS for my rasberry pi Zero W. And I have checked that the card is seated firmly in the back of the printer motherboard. I've also rebooted the printer mumerous times. Rebooted the lap top I use in conjunction with the printer many times as well.
Hopefully, someone will have an idea. Meanwhile, I'm back to "sneaker-net" with the SD card. (Ponterface stopped working as well).
RE: Prusalink
How did you manage to even post here? There are three subcategories and you managed to post into none of them 😀
Anyway, yea, PrusaLink is failing to start. But the only issue doccumented here was having an apostrophe in your Wi-Fi network SSID.
Is the web interface not running at all?
If not, could you extract the syslog from the raspi SD card?
If the web server is not running, you would have to enable SSH and then use filezilla or another sftp client to copy the file over.
Sory i missed this, but the post almost looks like it was trying to hide