Avisos
Vaciar todo
X Axis Calibration failing with wrong values in the display and rebooting
The assembly of the 5 tools edition and first calibration worked fine but the first print of the HERRINGBONE PLANETARY GEAR sample with one tool ended up in horizontal layer shifting.
After restarting the X-Axis calibration it sometimes finishes , sometimes this error occurs.
Best Answer by Wolfgang:
The support helped to get this problem fixed , it was a loose left side pulley.
This was not checked , because it was a semi assembled part.
Respondido : 07/11/2024 7:32 pm
Topic starter
answered:
RE:
The first printed object looks like this , the first photo shows the object upside down , so the first layer startet without errors.
Esta publicación ha sido modificada el hace 3 weeks por Wolfgang
Respondido : 07/11/2024 7:54 pm
Topic starter
answered:
X Axis Calibration failing with wrong values in the display and rebooting
the calibration video :
Respondido : 07/11/2024 8:02 pm
Topic starter
answered:
RE: X Axis Calibration failing with wrong values in the display and rebooting
Respondido : 09/11/2024 1:35 pm
Topic starter
answered:
RE: X Axis Calibration failing with wrong values in the display and rebooting
The support helped to get this problem fixed , it was a loose left side pulley.
This was not checked , because it was a semi assembled part.
Respondido : 23/11/2024 10:30 am