X Axis Calibration failing with wrong values in the display and rebooting
 
Notifications
Clear all

X Axis Calibration failing with wrong values in the display and rebooting  

  RSS
Wolfgang
(@wolfgang-7)
Active Member
X Axis Calibration failing with wrong values in the display and rebooting

The assembly of the 5 tools edition and first calibration worked fine but the first print of the HERRINGBONE PLANETARY GEAR sample with one tool ended up in horizontal layer shifting.

After restarting the X-Axis calibration it sometimes finishes , sometimes this error occurs.

  

Best Answer by Wolfgang:

The support helped to get this problem fixed , it was a loose left side pulley.

This was not checked , because it was a semi assembled part.

Posted : 07/11/2024 7:32 pm
Wolfgang
(@wolfgang-7)
Active Member
Topic starter answered:
RE:

The first printed object looks like this , the first photo shows the object upside down , so the first layer startet without errors.

This post was modified 1 month ago by Wolfgang
Posted : 07/11/2024 7:54 pm
Wolfgang
(@wolfgang-7)
Active Member
Topic starter answered:
X Axis Calibration failing with wrong values in the display and rebooting

the calibration video :

https://storage.googleapis.com/prusa3d-content-prod-14e8-wordpress-forum-prod/2024/11/a8352fdc-20241107_164118.mp4

Posted : 07/11/2024 8:02 pm
Wolfgang
(@wolfgang-7)
Active Member
Topic starter answered:
RE: X Axis Calibration failing with wrong values in the display and rebooting

https://storage.googleapis.com/prusa3d-content-prod-14e8-wordpress-forum-prod/2024/11/d8a0f2bf-output.mp4

Posted : 09/11/2024 1:35 pm
Wolfgang
(@wolfgang-7)
Active Member
Topic starter answered:
RE: X Axis Calibration failing with wrong values in the display and rebooting

The support helped to get this problem fixed , it was a loose left side pulley.

This was not checked , because it was a semi assembled part.

Posted : 23/11/2024 10:30 am
Share: