Firmware 1.2.3-FINAL for Original Prusa SL1
Hi guys,
this is a final version of the firmware recommended to all users 😎 Note that this update is sent primarily via OTA (over-the-air). Before flashing the firmware manually, check your internet connection on the SL1 first.
What is new?
- Fixed tilt jerk in calibration
- Fixed rehoming tilt when printing
- Others
A detailed description of changes:
Fixed jerk in calibration
Some machines have encountered problems during the calibration process while measuring tower height. The tilt mechanism couldn't handle the pressure from the printing platform and skipped a few steps. The current in the tilt motor is now increased to withstand the applied load.
Fixed rehoming tilt when printing
The printer now properly rehomes when it loses a step in the movement up (e.g. printing extremely thin layers using tough resins).
Others
- Removed unnecessary movement in Home Tank function
- Prevent rehoming while measuring tilt times
---
Supported printers:
- Original Prusa SL1
Download link:
Please report any bug here:
https://github.com/prusa3d/Prusa-Firmware-SL1/issues
As always, we wish you happy printing and look forward to your feedback!
/ Knowledge Base
The guy behind Prusa assembly manuals...