RE: Upgrade path from MK3.5 to MK4
I can see what he left that out. This cost of the parts in total makes that cost prohibitive for the repair kit.
@ All: Feel free to send an email to [email protected]. I have done so and look forward to a response (if it comes).
--------------------
Chuck H
3D Printer Review Blog
RE: Upgrade path from MK3.5 to MK4
@cwbullet: do you have a suggestion on how to achieve an escalation towards management at prusa? So far I have been blocked or put off by first-level support.
RE: Upgrade path from MK3.5 to MK4
@cwbullet: do you have a suggestion on how to achieve an escalation towards management at prusa? So far I have been blocked or put off by first-level support.
I would recommend making post as response to blog entries, Facebook, YouTube, and maybe PMs to prusa staff on the forum. Emailing the CEO is unlike to get a response. CEOs probably get 1000s of emails a day. You can try that but is is unlikely to be successful. I hope I am wrong.
--------------------
Chuck H
3D Printer Review Blog
RE: Upgrade path from MK3.5 to MK4
I figured when I picked the 3.5, prusa would allow me to upgrade further when I'm ready and so far this seems lacking still.
RE: Upgrade path from MK3.5 to MK4
Same here. I upgraded my MK3S+ to Mk3.5 and still waiting to a chance to upgrade to the MK3.9
RE: Upgrade path from MK3.5 to MK4
recently sent to me when i enquired again, Bottom line, dont hold your breath
Reply 1
Hello,
thank you for your email. Currently, we are not planning on releasing an upgrade from MK3,5 to MK4, but we are collecting the feedback and if there is a demand, we will release it
Reply 2
we are checking the forum as well. At this moment, we have not yet decided if we release it or not. It might be a part of a future upgrade. You can subscribe to the newsletter. That way, we can let you know
RE: Upgrade path from MK3.5 to MK4
I would very interested in an upgrade unit for the 3.5 to MK4 kit, immediately purchasing upgrade in a heart beat.
RE: Upgrade path from MK3.5 to MK4
I would be interested also.
--------------------
Chuck H
3D Printer Review Blog
RE: Upgrade path from MK3.5 to MK4
did someone try to sell there mk3.5 printer? I did and the max amount I could get is 500 Euro.
Mine mk3.5 has a bondtech extruder en mosquito hotend.
?
RE: Upgrade path from MK3.5 to MK4
I´m selling mine MK3.5 also for 530€
did someone try to sell there mk3.5 printer? I did and the max amount I could get is 500 Euro.
Mine mk3.5 has a bondtech extruder en mosquito hotend.
?
RE: Upgrade path from MK3.5 to MK4
@CatEye:
Take comfort, the same thing happened to me. 459 EURO proceeds from 1 bidder. Sad!
It was strange that an MK3S+ kit was auctioned at the same time and brought in 600 EURO. The bidders obviously did not recognize the advantages of the MK3.5.
But I am glad that I switched to the MK4, as the possibility of an update from MK3.5 to MK4 is up in the air.
No more problems with the first layer with different steel sheets. No more problems with the suboptimal adaptation of the MK3.5-firmware.
RE: Upgrade path from MK3.5 to MK4
There is something I don't understand about upgrading from mk3.5 to mk3.9.
All parts of 3.5 and 3.9 are the same and the only difference is the Nextruder.
Shouldn't I simply replace the Nextruder of 3.9 or mk4 with an upgrade kit?
I wonder why they don't provide an upgrade path from 3.5 to 3.9.
I am also satisfied with upgrading to 3.5 at a low price, but I am willing to pay for Nextruder if I can upgrade.
RE:
I am with you, would buy the upgrade from the 3.5 to 3.9 or 4.0 straight away if available. I am keeping my fingers crossed. I purchased the MK4 after upgrading my MK3s to the 3.5, but found the advantages of the mk4 well and truly worth it over the 3.5 Hopefully there will be an upgrade available soon.
There is something I don't understand about upgrading from mk3.5 to mk3.9.
All parts of 3.5 and 3.9 are the same and the only difference is the Nextruder.
Shouldn't I simply replace the Nextruder of 3.9 or mk4 with an upgrade kit?
I wonder why they don't provide an upgrade path from 3.5 to 3.9.
I am also satisfied with upgrading to 3.5 at a low price, but I am willing to pay for Nextruder if I can upgrade.
RE: Upgrade path from MK3.5 to MK4
I have pointed out to them that if they took a 3s+to mk4 upgrade kit and just removed the parts that make up the 3.5 upgrade kit they would have a 3.5 to mk4 upgrade kit and a 3s+ to 3.5 upgrade kit. However i was told that it wasn't as simple as that. I can see it would be more difficult to break a kit down but while they were packing the parts all the 3.5 bits go in one box all the 3.5 to mk4 in another box. I really dont see the problem. its not like they are being left with unsaleable parts.
From their why buy a prusa printer page
"If you buy our 3D printer, you can upgrade it later to the new version, no need to buy a new model."
Bit of a joke in light of you cant upgrade the 3.5