Notifications
Clear all

MK3.5 Upgrade Kit  

Strona 2 / 4
  RSS
ronnie12342003
(@ronnie12342003)
Estimable Member
RE:

who are you their spokes person they already said about the psu ages ago its not like they were unaware of these problems its just there way of treating us me like mushrooms fed muck and kept in the dark 

Opublikowany : 03/08/2023 4:43 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: MK3.5 Upgrade Kit

Nope.  I am just posting the message off the shipping page and what is not he forum and Reddit.  It is clear based on that statement that there is something on the printers "in the wild" that is different from the printers they have in their shop.  As a user that has upgraded a half a dozen Mk3 printers all the way to Mk3S+ and built both MK3S and Mk3S+, I have seen the variation of parts and respect the complexity of the upgrade planning.  

This delay does not surprise me but I am happy that I am not having deal with a printer being down because I started a faulty upgrade.  

Posted by: @ronnie12342003

who are you their spokes person they already said about the psu ages ago its not like they were unaware of these problems its just there way of treating us me like mushrooms fed shit and kept in the dark 

 

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 03/08/2023 4:59 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: MK3.5 Upgrade Kit

One other thing, I am thinking about selling my MK3S+ upgraded printers and just building the full Mk4 kits.  the upgrades are expensive and it might be better to have a new printer.  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 03/08/2023 5:01 pm
Just Brad
(@just-brad)
Trusted Member
RE: MK3.5 Upgrade Kit

But then again; the online chats and I think one or two videos said it could be upgraded.  I had asked one point; what parts do I need for my old Mark III to get upgraded and heard no official response other than feed back they had been told it could be upgraded.  I went with the full 4.0 upgrade path so I would have spare parts for my other Mk IIIS+.

Opublikowany : 03/08/2023 10:24 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: MK3.5 Upgrade Kit

Was that before or after the current delay?  I am sure they will find a solution, but something has cause the delay.  

Posted by: @just-brad

But then again; the online chats and I think one or two videos said it could be upgraded.  I had asked one point; what parts do I need for my old Mark III to get upgraded and heard no official response other than feed back they had been told it could be upgraded.  I went with the full 4.0 upgrade path so I would have spare parts for my other Mk IIIS+.

 

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 03/08/2023 10:26 pm
Just Brad
(@just-brad)
Trusted Member
RE:

 

Posted by: @cwbullet

Was that before or after the current delay?  I am sure they will find a solution, but something has cause the delay.  

Posted by: @just-brad

But then again; the online chats and I think one or two videos said it could be upgraded.  I had asked one point; what parts do I need for my old Mark III to get upgraded and heard no official response other than feed back they had been told it could be upgraded.  I went with the full 4.0 upgrade path so I would have spare parts for my other Mk IIIS+.

 

that was both before I ordered and after I ordered the upgrade.  The current delay it seems so far to be about 30 days and increasing... 

The current delay is on people for the 4.0 upgrade with on record early MK III - like I have.

 

so based on a old post - the order was assembled 4.0 machines, followed by 4.0 full kits, followed by 4.0 upgrades (just started), then 3.9 and then 3.5

 

what is the source of the current delay - no idea - and it should be just a matter of time...putting the way back hat on again; if you wanted a 3.5 upgrade you did have to upgrade the base MK III to an MK IIIS+.  

I do have an upgrade kit I received just prior to the mk iv for the MK III->IIIS+ - so I have those parts on hand already.

Opublikowany : 03/08/2023 10:47 pm
tcottle
(@tcottle)
Active Member
RE: MK3.5 Upgrade Kit

I purchased my MK3S as a kit on 5/2020.  I placed an order for the MK3 to MK3.9 upgrade kit on 4/10/2023 (order 1681141157)  This weekend I asked for an update on its shipping status from customer service via the chat window.  I was told they could not give an estimated ship date for the upgrade kit since they have not begun to ship the kits yet.   This is a little different than what they state on the Shipping Information page ["we are shipping the upgrade only to customers who own (according to our database) a compatible printer."]

https://help.prusa3d.com/article/shipping-information_2297

It would nice if someone from Prusa could provide an update on the kit status

 

Opublikowany : 07/08/2023 5:47 pm
ronnie12342003
(@ronnie12342003)
Estimable Member
RE: MK3.5 Upgrade Kit

as mando says this is the way 

Opublikowany : 08/08/2023 11:50 am
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: MK3.5 Upgrade Kit

They may have started shipping the Mk3S->MK4 kits but have not started shipping the Mk3S to Mk4 kits.  Reportedly, they had some issues and slowed or shopped the shipments.  

Your order was for a specific upgrade - did you give an order number?  If you did, they might have changed the answer.  

Posted by: @tcottle

I purchased my MK3S as a kit on 5/2020.  I placed an order for the MK3 to MK3.9 upgrade kit on 4/10/2023 (order 1681141157)  This weekend I asked for an update on its shipping status from customer service via the chat window.  I was told they could not give an estimated ship date for the upgrade kit since they have not begun to ship the kits yet.   This is a little different than what they state on the Shipping Information page ["we are shipping the upgrade only to customers who own (according to our database) a compatible printer."]

https://help.prusa3d.com/article/shipping-information_2297

It would nice if someone from Prusa could provide an update on the kit status

 

 

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 08/08/2023 1:33 pm
tcottle
(@tcottle)
Active Member
RE: MK3.5 Upgrade Kit
Posted by: @cwbullet

They may have started shipping the Mk3S->MK4 kits but have not started shipping the Mk3S to Mk4 kits.  Reportedly, they had some issues and slowed or shopped the shipments.  

Your order was for a specific upgrade - did you give an order number?  If you did, they might have changed the answer.  

Posted by: @tcottle

I purchased my MK3S as a kit on 5/2020.  I placed an order for the MK3 to MK3.9 upgrade kit on 4/10/2023 (order 1681141157)  This weekend I asked for an update on its shipping status from customer service via the chat window.  I was told they could not give an estimated ship date for the upgrade kit since they have not begun to ship the kits yet.   This is a little different than what they state on the Shipping Information page ["we are shipping the upgrade only to customers who own (according to our database) a compatible printer."]

https://help.prusa3d.com/article/shipping-information_2297

It would nice if someone from Prusa could provide an update on the kit status

 

I did give the agent my order number.  I also entered the question via e-mail and they just replied :

"The estimated shipping date of your order is by the month of September, but for now, these estimated times can change and can be shorter because we are working har to ship as much as possible. Hopefully sooner. "

Opublikowany : 08/08/2023 5:00 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: MK3.5 Upgrade Kit

I suspect that in the chat that they are individualizing the answer to the type of upgrade being purchased.  

Posted by: @tcottle
Posted by: @cwbullet

They may have started shipping the Mk3S->MK4 kits but have not started shipping the Mk3S to Mk4 kits.  Reportedly, they had some issues and slowed or shopped the shipments.  

Your order was for a specific upgrade - did you give an order number?  If you did, they might have changed the answer.  

Posted by: @tcottle

I purchased my MK3S as a kit on 5/2020.  I placed an order for the MK3 to MK3.9 upgrade kit on 4/10/2023 (order 1681141157)  This weekend I asked for an update on its shipping status from customer service via the chat window.  I was told they could not give an estimated ship date for the upgrade kit since they have not begun to ship the kits yet.   This is a little different than what they state on the Shipping Information page ["we are shipping the upgrade only to customers who own (according to our database) a compatible printer."]

https://help.prusa3d.com/article/shipping-information_2297

It would nice if someone from Prusa could provide an update on the kit status

 

I did give the agent my order number.  I also entered the question via e-mail and they just replied :

"The estimated shipping date of your order is by the month of September, but for now, these estimated times can change and can be shorter because we are working har to ship as much as possible. Hopefully sooner. "

 

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 08/08/2023 6:14 pm
ronnie12342003
(@ronnie12342003)
Estimable Member
RE: MK3.5 Upgrade Kit

pmsl 

Opublikowany : 08/08/2023 6:23 pm
thekaj
(@thekaj)
Active Member
RE: MK3.5 Upgrade Kit

I just got an email survey asking me to confirm what PSU and heatbed connector I have for my Mk3S+ -> M3.9 kit order.  The email notes that they're now scheduled to start shipping at the end of August.  It looks like if you have an older (silver) PSU and/or a heatbed connection that is soldered, your machine isn't fully compatible with the 4.0 or 3.9 upgrade.  The good news for me is that my machine has the newer parts for both.

I'd be shrugging over the delays if they hadn't immediately charged me for my order in early April.  Getting charged and then (hopefully) waiting 5 months for my order to finally ship is a long time to essentially be loaning them money.

Opublikowany : 09/08/2023 4:11 pm
ronnie12342003
(@ronnie12342003)
Estimable Member
RE: MK3.5 Upgrade Kit

end of august ffs taking the piss 

Opublikowany : 09/08/2023 4:25 pm
ronnie12342003
(@ronnie12342003)
Estimable Member
RE: MK3.5 Upgrade Kit

i just want the 3.5 kit Jesus 

Opublikowany : 09/08/2023 4:26 pm
ronnie12342003
(@ronnie12342003)
Estimable Member
RE: MK3.5 Upgrade Kit

so now its another 85 pounds for the heatbed piece and 9 pounds for the wiring harness is this on top of the money I paid in April looks like to me you are making this up as you go along  

Opublikowany : 09/08/2023 4:34 pm
tcottle
(@tcottle)
Active Member
RE: MK3.5 Upgrade Kit

 

Posted by: @thekaj

I just got an email survey asking me to confirm what PSU and heatbed connector I have for my Mk3S+ -> M3.9 kit order.  The email notes that they're now scheduled to start shipping at the end of August.  It looks like if you have an older (silver) PSU and/or a heatbed connection that is soldered, your machine isn't fully compatible with the 4.0 or 3.9 upgrade.  The good news for me is that my machine has the newer parts for both.

I'd be shrugging over the delays if they hadn't immediately charged me for my order in early April.  Getting charged and then (hopefully) waiting 5 months for my order to finally ship is a long time to essentially be loaning them money.

I just got the e-mail survey.  Mine has the black P/S and screw terminal heatbed.   Since my printer falls in the "OK" category I'm hopeful that the kit get shipped in August

Opublikowany : 09/08/2023 5:06 pm
tcottle
(@tcottle)
Active Member
RE: MK3.5 Upgrade Kit

 

Posted by: @ronnie12342003

so now its another 85 pounds for the heatbed piece and 9 pounds for the wiring harness is this on top of the money I paid in April looks like to me you are making this up as you go along  

Well that sounds pricey - It would seem that you would be better off selling the your MK3 printer and purchasing a MK4 kit

Opublikowany : 09/08/2023 5:09 pm
ronnie12342003
(@ronnie12342003)
Estimable Member
RE: MK3.5 Upgrade Kit

i have spoken to help desk and they say i will get an email and they will sort it no extra 

Opublikowany : 09/08/2023 5:16 pm
tcottle polubić
ronnie12342003
(@ronnie12342003)
Estimable Member
RE: MK3.5 Upgrade Kit

thats what i thought lol

Posted by: @tcottle

 

Posted by: @ronnie12342003

so now its another 85 pounds for the heatbed piece and 9 pounds for the wiring harness is this on top of the money I paid in April looks like to me you are making this up as you go along  

Well that sounds pricey - It would seem that you would be better off selling the your MK3 printer and purchasing a MK4 kit

 

Opublikowany : 09/08/2023 5:17 pm
Strona 2 / 4
Share: