Notifications
Clear all
Unload issue
Hi all. Been struggling trying to do a simple 2 color print all day. It seems I'm getting unload issues, just on lane 2. Opening it up, the filament seems to be bent over. Any ideas why?
This topic was modified před 5 years by rendez2k
Napsal : 22/04/2020 10:19 pm
RE: Unload issue
Hi all. Been struggling trying to do a simple 2 color print all day. It seems I'm getting unload issues, just on lane 2. Opening it up, the filament seems to be bent over. Any ideas why?
I would check the sensor. It may be contaminated with filament residues or poorly adjusted. I would also check that all holes and ptfe tubes are clear.
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.
Napsal : 22/04/2020 10:54 pm