Start Print Timer through OctoPrint

Poslední Příspěvek

RSS

Frank Deschner

(@frank-deschner)

Active Member

Start Print Timer through OctoPrint

I am using Cura and OctoPrint for my files and find it annoying that the print timer on the Prusa Display doesn't work. I have tried to integrate M75 in the start GCode, but the Prusa Firmware doesn't support this GCode.

How does Slic3r do the trick? I couldn't find anything in its GCode.

Does anyone have an idea how to solve this problem?

This topic was modified před 5 years by Frank Deschner

Napsal : 24/11/2019 12:02 am

Mike Daneman

(@mike-daneman)

Estimable Member

RE: Start Print Timer through OctoPrint

Posted by: @frank-d5

I am using Cura and OctoPrint for my files and find it annoying that the print timer on the Prusa Display doesn't work. I have tried to integrate M75 in the start GCode, but the Prusa Firmware doesn't support this GCode.

How does Slic3r do the trick? I couldn't find anything in its GCode.

Does anyone have an idea how to solve this problem?

Prusa Slicer uses the M73 command to tell the printer how much time is left.

Napsal : 11/12/2019 4:38 am

Frank Deschner

(@frank-deschner)

Active Member

Topic starter answered:

RE: Start Print Timer through OctoPrint

@mdaneman

Thank you. I found that out too. Now I just need to find a plug-in or something to control it.

Napsal : 11/12/2019 5:27 pm

Fórum Statistiky

565 Fóra

63.5 K Témata

445.7 K Příspěvky

20 Online

68.7 K Uživatelé

Poslední Příspěvek: Feature Request: Place/move added parts by "jogging" Nový Uživatel: Frickelfred Recent Posts Unread Posts Tags

Forum Icons: Forum contains no unread posts Forum contains unread posts

Topic Icons: Not Replied Replied Active Hot Sticky Unapproved Solved Private Closed