Notifications
Clear all
MK3 Holder for small diameter spools
I originally posted this to Thingiverse back in January but for some reason didn't write about it here. I've been going through and adding step files to all my things so I figured this was a good opportunity for this post. I spent a lot of time in Fusion 360 duplicating the geometry of the frame mount area of the Prusa spool holder and thought the holder, or at least the step file may be useful to someone.
https://www.thingiverse.com/thing:2764707
Napsal : 11/04/2018 6:03 am
chriscombs se líbí
Re: MK3 Holder for small diameter spools
Or you could just trim down the end of the supplied one so the small spools slip over it - leaving enough of a lip to hold all spools in place
Napsal : 11/04/2018 5:28 pm
RE: MK3 Holder for small diameter spools
I've been using this for a number of years on my mk3 as a way of keeping a third spool alongside the official spool holder. So, thanks!
Napsal : 21/06/2024 5:14 pm