FAQ? Basic installation and setup documentation for using RPI Zero 2 W and Octoprint in a mks3+
Sorry, this has to be a FAQ, but I can't find an answer.
Got a link to a writeup, manual, description, or similar thing on how to install a Raspberry Pi Zero 2 W into my MKS3+ and get octoprint working?
I've got the RPI, flashed the software on it. I know that the RPI physically mounts into the printer, but I don't know where. And I don't have any idea
of any details, like do I need a header for the 40 pins of GPIO?
Thanks
Pat
RE: FAQ? Basic installation and setup documentation for using RPI Zero 2 W and Octoprint in a mks3+
You don't need/want all 40 pins, just 5. The RPi mounts on the back of the electronics enclosure (you have to remove the break-away panel).
You can find more details in these locations:
https://www.prusa3d.com/product/raspberry-pi-zero-for-prusalink/
https://help.prusa3d.com/guide/prusalink-and-prusa-connect-setup-mk3-s-_221744