thermistor wire snapped of i3mk2 hotend

Seite 2 / 2 Vorherige

Letzter Beitrag

RSS

jim.h

(@jim-h)

Eminent Member

Themenstarter answered:

Re: thermistor wire snapped of i3mk2 hotend

Just to update (I'm the OP)

Mine was totally wedged in from the factory. It wasn't PLA glue, the thermistor ceartridge was an extremely tight fit as the hot end was provided originally.

How did I solve this?

Couldn't knock it out with a hammer and punch, even after heating the hot end

In the end I had to DRILL out the thermistor cartridge. That got the bastard thing out.

looks like a QA issue from Prusia. God knows what they used to fit this thing. Should never had been such a tight fit.

Veröffentlicht : 14/05/2017 2:12 pm

Seite 2 / 2 Vorherige

Forums-Statistiken

559 Foren

62.8 K Themen

442.4 K Beiträge

21 Online

67.4 K Mitglieder

Letzter Beitrag: Always doing Home XY First operation between tool changes Unser neuestes Mitglied: pinklemonade Neueste Beiträge Ungelesene Beiträge Schlagwörter

Forum Icons: Das Forum enthält keine ungelesenen Beiträge Das Forum enthält ungelesene Beiträge

Themen-Icons: Unbeantwortet Beantwortet Aktiv Heiß Oben angepinnt Nicht genehmigt Gelöst Privat Geschlossen