Notifications
Clear all

[Closed] SD Card reader not working  

Page 5 / 5
  RSS
christophe.p
(@christophe-p)
Member Moderator
Re: SD Card reader not working

I just tried it, and exFAT seems a no go, even with MBR partition table.

I'm like Jon Snow, I know nothing.

Posted : 08/04/2017 5:48 pm
elena.s
(@elena-s)
New Member
Re: SD Card reader not working

Hi, my printer suddenly refused to read my 2 cards, that were working fine today, and I thought of cleaning them with contact cleaner (IPA based) so whaddya know, they work! Happily printing right now!

Posted : 13/04/2017 6:34 pm
juanbenitezgarcia
(@juanbenitezgarcia)
New Member
Re: SD Card reader not working

I just received an MK3 and it does not read my SD card.
Invoice 182140325

Posted : 26/08/2018 6:55 pm
bobstro
(@bobstro)
Illustrious Member
Re: SD Card reader not working


I just received an MK3 and it does not read my SD card.
Try pulling the card out < 1mm and see if it is recognized.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 26/08/2018 7:36 pm
pierre.c2
(@pierre-c2)
New Member
Re: SD Card reader not working

That worked for us. Pull the card out about a milimeter and press the X. The card reader has been working for about a year before this.

Posted : 28/09/2018 6:43 am
jasper.m
(@jasper-m)
New Member
Re: SD Card reader not working


Just finished building my I3. When I insert the SD card, the LCD says card inserted. However on the scroll menu it says no sd card and if I click this, there are no files shown despite the fact that there are several files on the card....advice?

I have the same problem.
Prusa sent out a different display, but the problem persists. 🙁

mobdro
Posted : 19/12/2018 11:33 am
Mustrum Ridcully
(@mustrum-ridcully-2)
Honorable Member
Re: SD Card reader not working

did you also change the display ribbon cable and check for bent pins in both where it plugs into the display and into the EINSY? also triple check it is plugged in properly not backwards on one end or offset by one pin.

Posted : 20/12/2018 4:05 am
Joni the great
(@joni-the-great)
Active Member
RE: SD Card reader not working

Same issues here. if i push an SD card in all it gives me is a folder icon even though there are files on the SD card. Cant really do anything with my printer because of this  

Posted : 03/07/2019 5:11 pm
Joni the great
(@joni-the-great)
Active Member
RE: SD Card reader not working
Posted by: joan.t

 

Display shows card present

 

Shows card removed

 

Shows card re inserted...   Did this issue get resolved???

Posted : 03/07/2019 5:13 pm
nadirchalin
(@nadirchalin)
New Member
RE: SD Card reader not working

I solved this problem by downloading this program and formatting my SD card from here!

https://www.sdcard.org/downloads/formatter/

I hope it will help you
Posted : 24/04/2020 6:30 am
Leoyeung
(@leoyeung)
New Member
RE: SD Card reader not working

I am a Mac I brought the assembled version.

“When I insert the SD card, the LCD says card inserted. However on the scroll menu it says no sd card and if I click this, there are no files shown despite the fact that there are several files on the card....advice?”

I have the same problems. 

how can I fix it ?

Posted : 11/05/2020 6:47 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: SD Card reader not working

@leoyjobs

Format the SD card with "SD Card Formatter". You should also make sure that there are no special characters in the file name.

SD Card Formatter: https://www.sdcard.org/downloads/formatter/

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 11/05/2020 7:01 pm
DCBolt
(@dcbolt)
New Member
RE: SD Card reader not working

my MK3S / MMU2S also just stopped reading SD cards today. I've tried everything I can think of, factory resetting, firmware updating, firmware back-logging.. multiple SD cards, reformatting SD cards... same results.  I'm getting the "External SPI flash W25X20CL is not responding. Language switch unavailable" which to my understanding is a memory issue and shouldn't affect the ability to read SD cards. It detects when an SD card is inserted, loads to the root and shows as empty- if i go back into the menu it then says "No SD Card"....?  the drive on the screen says "F?" 

Anyone have this same issue or can think of something I haven't tried yet???  Thank you! 

Posted : 03/06/2020 9:10 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: SD Card reader not working

@devin

Maybe your einsy or the card reader ( https://help.prusa3d.com/en/article/external-spi-flash-w25x20cl-not-responding-error_112019 ) is faulty. I would contact the Prusa chat.

Did you check all connections from einsy to the LCD display (ribbon cable)?

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 03/06/2020 9:56 pm
Sean Frantti
(@sean-frantti)
New Member
RE: SD Card reader not working

@devin

This same thing happened to me today after many months of successful use.... did you ever get a resolution?  

Posted : 03/08/2020 12:37 am
DCBolt
(@dcbolt)
New Member
RE: SD Card reader not working

@sean-frantti - Yes, Prusa ended up sending out a replacement board

Posted : 04/08/2020 12:45 pm
Sean Frantti
(@sean-frantti)
New Member
RE: SD Card reader not working

@devin

  • Thanks for the response.  I emailed info@prusa a couple days ago with the issue but haven’t received any response , is there a better/recommended way to ask for help?
Posted : 04/08/2020 2:35 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: SD Card reader not working

@sean-frantti

Login with your Prusa account; select eshop; after a few seconds the chatwindow will appear on the right bottom.

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 04/08/2020 2:49 pm
Page 5 / 5
Share: