Notifiche
Cancella tutti
Plagued by ripples
I cannot seem to get rid of these ripples. What things should I tweak to help smooth things out?
Video here:
http://1drv.ms/1KVoKAh
Thanks
Postato : 08/08/2015 1:32 am
Topic starter
answered:
Re: Plagued by ripples
I am still getting ripples even with the latest Slic3er from http://www.prusa3d.com/drivers/ and using 0.25 Normal settings. Here is an image of that being printed.
Postato : 08/08/2015 9:17 pm
Re: Plagued by ripples
Increase the distance between the printbed and nozzle. The ripples are excess plastic.
Founder and owner / Majitel a zakladatel
Postato : 09/08/2015 7:16 pm
Topic starter
answered:
Re: Plagued by ripples
I am curious if reducing extrusion amount lower than 100% would accomplish the same?
Postato : 10/08/2015 4:04 pm