Notifications
Clear all

Plagued by ripples  

  RSS
K6TJO
(@k6tjo)
Estimable Member
Plagued by ripples

I cannot seem to get rid of these ripples. What things should I tweak to help smooth things out?

Video here:
http://1drv.ms/1KVoKAh

Thanks

Publié : 08/08/2015 1:32 am
K6TJO
(@k6tjo)
Estimable Member
Topic starter answered:
Re: Plagued by ripples

I am still getting ripples even with the latest Slic3er from http://www.prusa3d.com/drivers/ and using 0.25 Normal settings. Here is an image of that being printed.

Publié : 08/08/2015 9:17 pm
Josef Průša
(@josef-prusa)
Membre Admin
Re: Plagued by ripples

Increase the distance between the printbed and nozzle. The ripples are excess plastic.

Founder and owner / Majitel a zakladatel
Publié : 09/08/2015 7:16 pm
K6TJO
(@k6tjo)
Estimable Member
Topic starter answered:
Re: Plagued by ripples

I am curious if reducing extrusion amount lower than 100% would accomplish the same?

Publié : 10/08/2015 4:04 pm
Partager :