Notifiche
Cancella tutti
Left / Right Calibration Problem
Hi All --
I'm seeing that the perimeter ring and first layer of my prints is noticeably more flat on the left and more beaded up on the right side of the print bed. Per the manual, I started tinkering with the bed level calibration, and lowered the left and right in increments, checking the results. After a few cycles of incremental tinkering, I've lowered the left by -50 microns (max) and raised the right by +50 microns (max), and am not noticing really any difference in the first layer.
Anyone have any ideas on how I can remedy what I'm seeing?
Thanks in advance for any ideas!
Postato : 17/02/2017 5:13 pm