Notifications
Clear all

Imperfect Print Quality  

  RSS
caleb.d
(@caleb-d)
Active Member
Imperfect Print Quality

Hello all! I recently built my Prusa I3 MK2 kit. I followed the manual for calibration and my printer passed every step, the only 'warning' I received was that my axis was slightly off. That's what calibration is for though 🙂 My first two prints were the Prusa logo. Same filament and settings both times. Both came out great and identical in every way.

http://imgur.com/a/2Cj18

My issues started when I attempted to print the frog. There seems to be layer shifting and just general ugliness.

http://imgur.com/a/4MfQh

I then switched to Hatchbox white PLA and attrmpted a first layer with different z settings. Came out good I believe.

http://imgur.com/a/z5idZ

Using the same filament I attempted another print I got this result.

http://imgur.com/a/Id4aB

This being my first experience with 3d printers, I am at a loss. Please help out.

Opublikowany : 01/02/2017 8:21 am
Share: