Avisos
Vaciar todo

FW Bug Report?  

  RSS
Jim
 Jim
(@jim-3)
Eminent Member
FW Bug Report?

Prusa Team:

I just recently built my MK2 and everything is working beautifully. The martian printed almost perfectly.

Last night, I was printing a part and realized the filament was tangled on the spool.
So I put the print in pause mode, then I selected unload filament and cleared the tangle.

This seemed like a typical action for pausing printing, to replace a nearly empty spool or other spool / filament issue.

So after the filament was reloaded and I restarted the print the print speed was about 5% speed.
The screen said it was still "loading filament" but it was printing, albeit very very slowly.

Not certain this is a bug or something I did wrong.
Also, before the printing resumed the screen briefly showed the color change screen asking me if the color was clear or if I still need to load the fiber.
Once I selected yes from the color change screen the printer resumed printing very very slowly.

I'm running Prusa i3 MK2 w/ 3.0.3 FW.

kc

Respondido : 05/07/2016 10:14 pm
Compartir: