Avisos
Vaciar todo
layer shift
Hello. Can anyone advise me what to do with the layers that are shifted (the fiber is detached from the model)?
This is mainly in the X-axis.
The material is PETG Mladec and PrusaSlicer 2.2.0 is set to 0.20 mm quality.
The printer shows X belt tension on 226.
Respondido : 13/05/2020 8:41 am
RE: layer shift
The belt tension is much too high if you see the value 226.
Respondido : 30/05/2020 8:05 pm