Notifications
Clear all
Horizontal lines on my prints
Dears,
Please see the images below. This is just a test print with:
material: PLA at 200°C (bed 60°C) with flow multiplier 1,026 (tested with hollow cube stl)
layer height: 0.1mm,
layer width: 0.45mm
layers: 4 perimeters, 5 top, 4 bottom
speed: 15mm/s to 45mm/s
acceleration: up to 500 mm/s2 (jerk 8 mm/s)
All my prints are quite good except for those horrible horizontal line. I can't find a way to get rid of them. Any idea about causes and solutions ?
Thank you in advance.
Posted : 02/09/2019 10:05 am
Posted : 03/09/2019 4:24 am