Notifications
Clear all
Top layer issues
Hello,
I have issues with the last layer lately, as you can see from the picture the last layer detaches from the rest of the print at different spots.(see attached picture)
My settings: PLA 0.33 layer height, line width 0.4 with a 0.4 mm nozzle, temp 205°c and bedtemp 60°c. At first I thought it had to do with the z calibration, I did a complete recalibration but still the same issue. I tweaked the flow rate. I reduced the print speed for the top layer to 20mms which helped a but still not as expected. I didn't have these issues before and I am out of ideas. Maybe someone here had the same issues and has some tips?
Thank you
Posted : 09/01/2022 1:16 pm