Problems using Cura for i3 mk3s/mk3 to print
So I downloaded the cura mk3s/mk3 profiles for cura. The slicing process for a prototype i am trying to print out seems to go fine, yet when i try to print it out, it says the file is incomplete. I made sure all the settings were as described here: https://help.prusa3d.com/guide/how-to-import-profiles-to-cura-4-x-windows-macos_17848. While I can't show exactly what i am printing due to it being a prototype for product development, I can say it is essentially a series of mostly flat plates with holes so it can't be due to the parts themselves. I attached a picture of my settings if they help
RE: Problems using Cura for i3 mk3s/mk3 to print
update i see the nozzle is undefined in cura, how do i define it?
RE: Problems using Cura for i3 mk3s/mk3 to print
update 2: nozzle is now defined but issue persists
RE: Problems using Cura for i3 mk3s/mk3 to print
update 3: i turned my slice into a 3mf file, for some reason when i tried to open said file in prusa's own slicer, it wont read