Notifications
Clear all
Printing prusa supplied gcodes with a different filiment.
So I have tried to print a couple of the gcode files that came with my printer but the code always goes back to pla print temperatures. So ABS won't print even if I manually change the temps. Since they are gcode I can't load them in slicer and change the filament variables. Am I missing something?
Publié : 14/03/2021 1:17 am
RE: Printing prusa supplied gcodes with a different filiment.
GCODES are usually filament type/temp and printer specific. Get the original model and re-slice it for ABS and you can go there!
Publié : 14/03/2021 2:15 am
RE: Printing prusa supplied gcodes with a different filiment.
Agreed.
Download the bundled models here https://www.prusa3d.com/printable-3d-models/
And reslice for your chosen filament. I have done this with the batman model for tpu, petg, etc
Publié : 14/03/2021 12:53 pm
RE: Printing prusa supplied gcodes with a different filiment.
@ssill2
I did the same. They good models to see if you have the filament dialed in.
--------------------
Chuck H
3D Printer Review Blog
Publié : 16/03/2021 10:00 am