[Solved] Print other Items  

RE: Print other Items

That print sheet looks posatively disgustingly filthy - get it properly clean with some unscented dish soap and water (when its clean the water will just run off and you will be left with a few spots to dry off with a paper towel).  Use a clean paper towel to apply dish soap and wash it - you don't want to be smearing last nights curry on it...

The Z height also looks too high - have you done the calibration?  If not search for "life adjust z height - my way" and have a read.  Might be worth a read anyway tbh

RE: Print other Items

@minormatt

Agreed.  Dawn platinum scrub with hot water to get all that grime off.  Then a few runs of the 75mm test square to get that first layer dialed in.  If printing with PETG spray the sheet with original formula windex and wipe with a paper towel but leave a thin layer of windex on it to dry.

Here's the life z adjust

https://forum.prusa3d.com/forum/original-prusa-i3-mk3s-mk3-assembly-and-first-prints-troubleshooting/life-adjust-z-my-way/

RE: Print other Items

@ssill2

The Dawn Platinum is really cheap at Dollar General.  

RE: Print other Items

@cwbullet

Ah good to know.  Not that much is required so a big bottle lasts me quite a while lol.   It really does the trick though.  I save the 99% IPA for the textured sheet.

RE: Print other Items

@ssill2

The also sell the Dawn sponges for about a buck.  

RE: Print other Items

Ekke Ekke Ekke Ekke Ptang Zoo Boing!

RE: Print other Items

@hawai

I'm sorry I missed that party, it sounds like a good time was had by all.

RE: Print other Items

@swiss_cheese

I am not sure that is the party you should be looking for.  

RE: Print other Items

The obligatory meme reference 🙂

RE: Print other Items

@ Charles

I concur

RE: Print other Items

@ssill2

Especially not that party.  

RE: Print other Items

They did cancel "Burning Man" this year, so it stands to reason, they have to have an outlet somewhere, this may not be the last time we see this 🤨 

RE: Print other Items

@swiss_cheese

I hope covid ends soon.  So much of our lives are being delayed or canceled.  

RE: Print other Items

Things are really looking up here. Over 50% vaccination rates, mask and density restrictions are easing, but no ominous plateau on rate of decline. 

RE: Print other Items

@swiss_cheese

I wouldn’t call burning man a big loss lol

RE: Print other Items

Thank you guys for great feedback!

RE: Print other Items

@younex

Sure lol

RE: Print other Items

Posted by: @ssill2

@swiss_cheese

I wouldn’t call burning man a big loss lol

I was not trying to confirm nor deny it's validity, I was merely suggesting we have that to thank for the "Ooh Eeh Ooh Ah Ah Ting Tang Walla Walla Bing Bang" we received earlier, and that perhaps we should brace for more.

RE: Print other Items

@swiss_cheese

lol my bad I didn't make the connection 🙂

RE: Print other Items

@hawai

BTW, that wasn't wasted on me, I know my Python. just seemed like a great opportunity.  Knowing your a very art minded individual, and working on the project your doing.