% of fill for printing MK3S parts
Hi,
I bought a used MK3S and I would like to print parts in orange 😉
The Z axis supports for example. Do you know what percentage of fill in do i have to use.
In advance, thank you
RE: % of fill for printing MK3S parts
I think this is what you're looking for
https://media.prusaprinters.org/media/prints/57217/other_files/568215_b80bf623-2565-4c54-9a15-5ee8ac972a51/howtoprintparts.pdf#_ga=2.111989828.1718179183.1642283808-157152278.1620151388
RE: % of fill for printing MK3S parts
Here's the link to the MK3S parts
https://www.prusaprinters.org/prints/88272-i3-mk3s-printable-parts/files
RE: % of fill for printing MK3S parts
Thx ssill2 😎
RE: % of fill for printing MK3S parts
Sure, glad to help. In my case I went from the default orange lol
Thx ssill2 😎
RE: % of fill for printing MK3S parts
Also, when printing the lcd cover there were two sizes of screen. with 80mm, and I think one slightly larger. make sure to measure your lcd and ensure you're getting the right size opening in the lcd cover.
Thx ssill2 😎
RE:
I don't print anything with 20% grid infill anymore. I had too many situations in which I had crashes from the nozzle hitting infill. Since switching to 15% gyroid, never had a problem again.
Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...