My first prints with PetG
I try to get my settings right. seams that i get some blobbing from extruder some times. This leave it to many lying strings on the bed.
I try to change Z high following the guides. I think i get it purity okej.
If i lower i get more blobs and if i go higher it get worse in quality.
https://photos.app.goo.gl/LTAnLCu7AuhVmiqd7
Second test i change Speed so it print faster and that solve some more blobbing but still sometimes i get a big blob out from the extruder.
https://photos.app.goo.gl/anGeMD2qYvibTrj27
From the big pic i found something odd. it don't print even after a bit of high.
https://photos.app.goo.gl/7brvpHe5ABPFnqvMA
I am working to print out parts to my enclosure.
RE: My first prints with PetG
I think i found why i got some problems. I change my needle to harden steal before i start printing petg. i found now hotted Leaking between...
Can this really hapend?
Se image
https://photos.app.goo.gl/D9tLsXDX5MpEJ6Pv9
RE: My first prints with PetG
And now know what i am to need to do. Thx for the tip Mullcom =D