Notifications
Clear all
How do i describe this problem and what is the fix?
Publié : 07/03/2022 11:26 pm
Your first layer Z calibration is too low, too much squish.
Please show us your first layer calibration print on the print-sheet.
Cheerio,
Publié : 07/03/2022 11:39 pm
RE: How do i describe this problem and what is the fix?
It looks like your z-offset is putting your nozzle too low. Try raising it.
Mk3S+,SL1S
Publié : 07/03/2022 11:40 pm
Topic starter
answered:
RE: How do i describe this problem and what is the fix?
Got it thanks!
fixed that and now im trying to find settings for a sunlu s8 in prusaslicer.
It prints but the walls are not complete.
Publié : 10/03/2022 11:49 pm