Notifications
Clear all

Cylinder on flat layer issue  

  RSS
Deadeyeskunk
(@deadeyeskunk)
Active Member
Cylinder on flat layer issue

Hey all,

I'm printing a cylinder on top of a flat layer as a peg like a lego. The problem is, the first couple layers are too wide and make the two pieces not fit flat.  How can I prevent this or how can I take care of it post process? 

Thanks!

Publié : 28/01/2023 5:50 am
fuchsr
(@fuchsr)
Famed Member
RE: Cylinder on flat layer issue

Do you have elephant foot compensation turned on? 

Publié : 28/01/2023 12:16 pm
Robin
(@robin)
Prominent Member
RE: Cylinder on flat layer issue

 

Posted by: @fuchsr

Do you have elephant foot compensation turned on? 

That will do nothing for a peg on an other layer since elephant foot compensation only affects the first layer...

If at first you don't succeed, skydiving is not for you.

Publié : 28/01/2023 12:22 pm
Robin
(@robin)
Prominent Member
RE: Cylinder on flat layer issue

@deadeyeskunk would you post the zipped Slicer project file?

If at first you don't succeed, skydiving is not for you.

Publié : 28/01/2023 12:23 pm
fuchsr
(@fuchsr)
Famed Member
RE: Cylinder on flat layer issue

Correct. I misunderstood the model.

Publié : 28/01/2023 2:04 pm
Deadeyeskunk
(@deadeyeskunk)
Active Member
Topic starter answered:
RE: Cylinder on flat layer issue

I apologize, apparently, I posted this in the Mini forum instead of the MK3S+ forum.  Here is the 3mf file for prusaslicer that I've been using.

https://drive.google.com/file/d/1pknDJw5tb0bne5or5sHzzjPmWOVdxqnM/view?usp=share_link

Publié : 28/01/2023 4:52 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: Cylinder on flat layer issue

Topic Moved

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Publié : 28/01/2023 6:12 pm
Robin
(@robin)
Prominent Member
RE: Cylinder on flat layer issue

 

Posted by: @joantabb

Topic Moved

But not to MK3S 😀

If at first you don't succeed, skydiving is not for you.

Publié : 28/01/2023 6:55 pm
Deadeyeskunk
(@deadeyeskunk)
Active Member
Topic starter answered:
RE: Cylinder on flat layer issue

Lol yeah it was a fair move and my mistake.

Publié : 28/01/2023 8:24 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE:

@ Robin
"But not to MK3S 😀"

Doh! Perfectionist!

Lol

 

Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Publié : 28/01/2023 11:36 pm
Partager :