Cylinder on flat layer issue
Hey all,
I'm printing a cylinder on top of a flat layer as a peg like a lego. The problem is, the first couple layers are too wide and make the two pieces not fit flat. How can I prevent this or how can I take care of it post process?
Thanks!
RE: Cylinder on flat layer issue
Do you have elephant foot compensation turned on?
Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...
RE: Cylinder on flat layer issue
Do you have elephant foot compensation turned on?
That will do nothing for a peg on an other layer since elephant foot compensation only affects the first layer...
If at first you don't succeed, skydiving is not for you.
Find out why this is pinned in the general section!
RE: Cylinder on flat layer issue
@deadeyeskunk would you post the zipped Slicer project file?
If at first you don't succeed, skydiving is not for you.
Find out why this is pinned in the general section!
RE: Cylinder on flat layer issue
Correct. I misunderstood the model.
Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...
RE: Cylinder on flat layer issue
I apologize, apparently, I posted this in the Mini forum instead of the MK3S+ forum. Here is the 3mf file for prusaslicer that I've been using.
https://drive.google.com/file/d/1pknDJw5tb0bne5or5sHzzjPmWOVdxqnM/view?usp=share_link
RE: Cylinder on flat layer issue
Topic Moved
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK
RE: Cylinder on flat layer issue
Topic Moved
But not to MK3S 😀
If at first you don't succeed, skydiving is not for you.
Find out why this is pinned in the general section!
RE: Cylinder on flat layer issue
Lol yeah it was a fair move and my mistake.
RE:
@ Robin
"But not to MK3S 😀"
Doh! Perfectionist!
Lol
Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK