ASA Prusament Printing Issues on MK3s  

RE: ASA Prusament Printing Issues on MK3s

I know this is an old post, but were you able to resolve your issues? 

I've been printing random cheap ABS for over a year and the Prusument ASA is by far the worst experience I have had 😕 

RE: ASA Prusament Printing Issues on MK3s

Posted by: @mainmail360

I am new to 3D printing. Do I need to change any settings to successfully print ASA in slicer?

You will need to dial in the ASA.  I did not save my settings, but I know it was slightly different.  

RE: ASA Prusament Printing Issues on MK3s

Posted by: @mainmail360

Just assembled my MKS3, went through many prints with PETG and PLA with no problems. I have just received my Neutral ASA Prusament to try. Nearly 50% of my prints are failing (pics attached). Some layers not attaching, some shrinking. All PrusaSlicer settings are set to ASA. No issues with PLA or PET.

I am new to 3D printing. Do I need to change any settings to successfully print ASA in slicer?

I print almost exclusively ASA DuraPro with both the Mini and MK3, with and without enclosure. Important are correct temperature settings (approx. 255/100-110), no draught or preferably no fan and brim to reduce warping. This ASA can be printed very well on the textured printing bed.

ASA DuraPro

RE: ASA Prusament Printing Issues on MK3s

I have only tried the ASA from formfutura, perfect with excellent adhesion. I have bought a roll of prusament, but have not tried it yet

RE: ASA Prusament Printing Issues on MK3s

@manelto

Thanks for the tips! The filament is rated positively throughout the net, only the price is slightly higher. I will probably test it.

RE: ASA Prusament Printing Issues on MK3s

@manelto

Good filament.   It is in my reviews to write pile.