Simplify3D profile for 0.15mm Nozzle

Dernier message

RSS

sean.t

(@sean-t)

Active Member

Simplify3D profile for 0.15mm Nozzle

Hi all.

I've had my MK3 printer (not MK3 S or S+) for years and have only now bought a different size nozzle.

I've bought an E3D 0.15mm (and one of those silicone sock thingies).

I was wondering if there's a tried and tested .015mm nozzle profile for Simply3D ?

If not, can someone please look at the images below and give me tips what I need to change.

I know I need to change the nozzle diameter 😆 but I've also read the speed should come right down too. I flip flop between 'Default Printing Speeds' of 40-50 mm/s but I 've read that it should come down to about 20mm/s

I was also sent this by E3D.

https://e3d-online.com/blogs/news/0-15mm-high-resolution-nozzles-for-really-very-extremely-small-prints?_pos=1&_sid=cf4f52d38&_ss=r

Can peeps have a look at my S3D profile and suggest things I should change - or pay more attention to?

Publié : 18/09/2022 10:07 am

sean.t

(@sean-t)

Active Member

Topic starter answered:

RE: Simplify3D profile for 0.15mm Nozzle

I was wondering if there's a tried and tested .015mm nozzle profile for Simply3D ?

I was wondering if there's a tried and tested "0.15mm" nozzle profile for Simply3D ?

Publié : 18/09/2022 10:08 am

Statistiques du forum

566 Forums

63.1 K Sujets

444.1 K Messages

24 En-ligne

68.1 K Membres

Le dernier des messages: PRUSA Mini+ latest firmware seems really problematic, can't print at all. Notre nouveau membre: etiennep Messages récents Messages non lus Balises

Icones du forum: Le forum ne contient pas de messages non lus Le forum contient des messages non lus

Icones du sujet: Sans réponse Repondu Actifs Au top Épinglé Non approuvé Résolu Privé Fermé