Prusa Slicer 2.0.0 - File->Export->Export Config Bundle  

RE: Prusa Slicer 2.0.0 - File->Export->Export Config Bundle

Posted by: robin.h9

On initial opening of Prusa Slicer 2.0.0.  Make several configuration changes and save them individually.  Then attempt to save the Config Bundle using File->Export->Export Config Bundle causes the application to ABORT.

Reloading the written config displays the error: <unspecified file>(449): '=' character not found in line

Attached a snapshot.

Attachment removed

[presets]
print = 0.15mm QUALITY MK3
sla_prin

Program crash also happens when entering app and just doing the File->Export->Export Config Bundle

Please advise.

RE: Prusa Slicer 2.0.0 - File->Export->Export Config Bundle

I am not experiencing such crashes on MacOS 10.14.5 Mojave with PrusaSlicer 2.0.0. I am able to export and import config bundles without issue.

RE: Prusa Slicer 2.0.0 - File->Export->Export Config Bundle

There is this issue over on github https://github.com/prusa3d/PrusaSlicer/issues/2370 which sounds like its related and Bubnikv says its fixed in next release.

RE: Prusa Slicer 2.0.0 - File->Export->Export Config Bundle

now to see if the slic3r/prusaslicer version name mess is cleared up. made it a pain to get profiles synced across all my computers. 

RE: Prusa Slicer 2.0.0 - File->Export->Export Config Bundle

I await a fix with baited breath.  😉

RE: Prusa Slicer 2.0.0 - File->Export->Export Config Bundle

Looking over the latest release of Slic3r I see that there is an "ignore nonexistent  GCODE" bugfix in Slic3r on 5-10-2018.  I would have hoped that the fork that Prusa used had that bug fix in it.  But I see something isn't working.

Any updates?

RAH