Notifications
Clear all
Pronterface update needed for Macbook Pro
Hello. The pronterface version that downloaded does not work with a Macbook Pro. Apparently we need the version with the higher bit rate
Publié : 09/03/2023 4:33 am
Topic starter
answered:
RE: Pronterface update needed for Macbook Pro
Went to Pronterface site and downloaded the latest version.
Printrun 2.0.0rc8 kliment released this Feb 2, 2021
Publié : 09/03/2023 4:35 am
Topic starter
answered:
RE: Pronterface update needed for Macbook Pro
Oh, I am in. Changed Port to /dev/tty.usbmodem14101 @ 115200. and pressed connect.
Publié : 09/03/2023 4:38 am
Topic starter
answered:
RE: Pronterface update needed for Macbook Pro
Disconnecting Pronterface. Started PRUSASlicer.
Downloaded new Flash
Under configuration/Flash printer firmware.
Select image: prusa3d_fw_MK..3_12_2_5713.hex
Serial port: Original Prusa i3 MK3 ('/dev/cu.usbmodem14101)
Press Flash !
Success. Now on 12.2
Publié : 09/03/2023 5:09 am
Topic starter
answered:
RE: Pronterface update needed for Macbook Pro
Oh, now we have a 12 minute Thermal model cal.
Publié : 09/03/2023 5:12 am