Notifiche
Cancella tutti
Printer doesnt finish print, tried new SD card
The MK3s I own has been stopping during the print. It doesn't send an error just randomly stops during the print. Doesn't home and sits on the print. The nozzle and bed cooldown like normal. It has done this on 2 seperate prints now and the last print I used a brand new SD card. Thinking the old card was the culprit. I should say I do have an mk3s+ that is printing fine along side and using Prusaslicer with no issues.
The MK3s has a Revo hotend but other than that everything is stock.
Postato : 22/01/2023 2:47 pm