Notifiche
Cancella tutti
Oozing while hot but not printing
Hey everyone,
I just installed a 0.25mm nozzle and have noticed that while the hotend is hot but not actually printing (like after warm up but before print starts) that filament is oozing out. What is causing this? I don't remember seeing this with the 0.4mm nozzle. It's PLA at 215.
Thanks!
--Brian
Postato : 22/03/2019 7:54 pm
Re: Oozing while hot but not printing
gravity
Postato : 22/03/2019 8:46 pm
Re: Oozing while hot but not printing
That doesn't sound too uncommon. I have seen this on all 3d printers I used so far.
Postato : 25/03/2019 1:24 pm