Notifications
Clear all
Noozle temperature drop when the layer fan is on
Apparently the temperature of the noozle drops when the fan is on, which makes sense but shouldn 't happen.
Napsal : 18/04/2018 9:48 pm
Re: Noozle temperature drop when the layer fan is on
Looks to me like the PID controller for the nozzle wasn't even trying... you can see that in the regulation phase at a seemingly lower temperature. That's bizarre.
Napsal : 18/04/2018 10:48 pm
Re: Noozle temperature drop when the layer fan is on
I have the same thing. I think with PLA, and going from 0 - 100% it's a bit much. Also in connection with the intended Second layer temp drop.
So dropping temp for the second layer + 0 to 100% fan maybe too much for the software to get it perfect. If others don't have this problem I'm interested hearing about it.
Napsal : 20/04/2018 7:08 pm