Benachrichtigungen
Alles löschen

MKS3+ Firmware 3.13.3 still causes layer separation  

  RSS
NelisW
(@nelisw)
Active Member
MKS3+ Firmware 3.13.3 still causes layer separation

Flashed 3.13.3 this morning, three prints failed. 

The part has three 5 mm pins produced by PrusaSlicer cut operation. The second picture pictures shows what happens to the pins. The sides of the box separates  as shown in the first picture. I can send the 3mf file it it will help.

Now printing with 3.13.1 - perfectly as before!

Veröffentlicht : 28/03/2024 3:21 pm
Teilen: