MK3S+ strange noises
Hello, I have several MK3S+ and I am not completely inexperienced. All work well only one makes loud noises (see video). Exclusively with diagonal movement.
The bed is leveled perfectly, the Z height is correct and nothing is loose. The print quality is also not negatively affected.
Does anyone know where the noise can come from?
Sascha
RE: MK3S+ strange noises
caRnt play video but it could be bearings try lube theme
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: MK3S+ strange noises
bearings are ok and lubed. Can you try to open the video in a new tab? That works or me.
RE: MK3S+ strange noises
Done that and reformated it looks like it's corrupt could you try upload it but in a zip file
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: MK3S+ strange noises
Please try this link for the Video: http://bcd24.de/test/noise.mp4
RE: MK3S+ strange noises
That sort of sounds like the motor where is the noise coming from
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: MK3S+ strange noises
Is it coming from x y or z axis
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: MK3S+ strange noises
I caRnt play the video now it did once. Put the printer into stealth mode that may fix it
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: MK3S+ strange noises
My MK3s+ had 30 days of printing and it started to get a little noiser. I found the Y axis rod mount screws were all snug, but 1/2 to 3/4 turn to tight. Checked and tightened the 16 screws related to the Y axis rods and it quieted back down
RE: MK3S+ strange noises
My printer has started to sound this way as well. All bearings are lubricated and I know it is the Y axis that makes the noise. Will have to check the rods. Printer was quiet after assembly in March.