Notifiche
Cancella tutti
MK3S+ started to make noise after printing in PETG
Hi all, see attached video. I went through two successful prints using PETG and on the third print it started to make noises. They are coming from the printing head.
https://photos.app.goo.gl/QP2stgGNeAjpqTuR6
Questa discussione è stata modificata 2 months fa da ChargeFox
Postato : 11/09/2024 12:08 am
With anything like this first work through:
https://help.prusa3d.com/en/article/i3-printers-regular-maintenance_2072
https://help.prusa3d.com/guide/maintenance-tips_23200
- and come back here if problems persist.
Cheerio,
Postato : 11/09/2024 6:25 am