Avisos
Vaciar todo
MK3 Heater/Thermistor Not Connected
Needing some help with my Mk3 build. Getting the Heater/Thermisor not Connected Error
The bed heats up but the extruder does not. I am getting 24v on both circuits from the psu.
Thermistor resistance is 99.9k and the heater cartridge measures 15.4 ohms. Both appear to be consistent.
I have triple checked the heater and the thermistor connections and they match what is in the diagram.
What's my next step?
Thanks,
Jerold
Respondido : 07/02/2019 12:06 am