Notifications
Clear all
Layer Shift - Overheating
I am struggling with layer shifting on the x-axis when printing medium to large sized PETG models.
The shift can happen at any layer in the print. For example one time it might happen early in the print, or in the final layers.
After testing many prints, I have learned:
- The problem goes away when I point a small fan at the back-side of the controller.
- The problem does not happen when printing PLA
Has anyone else struggled with this problem?
This topic was modified 5 years temu by Jeff
Opublikowany : 03/06/2020 9:55 pm