Is either of these noctura fans the same as the OEM part on the MK3
 
Notifications
Clear all

Is either of these noctura fans the same as the OEM part on the MK3  

  RSS
KLAUS
(@klaus-3)
Trusted Member
Is either of these noctura fans the same as the OEM part on the MK3

I need a hot end fan for my prusa MK3, i found these two similar looking fans on amazon, Can some one tell me if either is the same as the OEM fan.  Can I use either of these will I need to change the conector? I have no electronic experience so I want to make sure I get the right one, I can put a new conector on as long as i know which wires go yo whic teminal.

Noctua NF-A4x10 5V PWM, Premium Quiet Fan with USB Power Adaptor Cable, 4-Pin, 5V Version (40x10mm, Brown)

here is the link to the above

https://www.amazon.com/dp/B07DXS86G7/ref=emc_b_5_i

OR

Noctua NF-A4x10 5V, Premium Quiet Fan, 3-Pin, 5V Version (40x10mm, Brown)

https://www.amazon.com/dp/B00NEMGCIA/ref=emc_b_5_t

 

 

Posted : 11/07/2020 11:59 pm
CovertPluto3502
(@covertpluto3502-2)
Trusted Member
RE: Is either of these noctura fans the same as the OEM part on the MK3

Both are the right size, but keep in mind that the OEM fan has a longer cable. You should get the 3 pin fan as the Einsy has 3 pins. You'll also need to crimp on some connectors, and extend the wires a fair bit. There are lots of images online to see the pinout of the fans.

This post was modified 4 years ago by CovertPluto3502
Posted : 13/07/2020 5:13 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Is either of these noctura fans the same as the OEM part on the MK3
Posted by: @bruce-h7

I need a hot end fan for my prusa MK3, i found these two similar looking fans on amazon, Can some one tell me if either is the same as the OEM fan.  Can I use either of these will I need to change the conector? I have no electronic experience so I want to make sure I get the right one, I can put a new conector on as long as i know which wires go yo whic teminal.

Noctua NF-A4x10 5V PWM, Premium Quiet Fan with USB Power Adaptor Cable, 4-Pin, 5V Version (40x10mm, Brown)

here is the link to the above

https://www.amazon.com/dp/B07DXS86G7/ref=emc_b_5_i

OR

Noctua NF-A4x10 5V, Premium Quiet Fan, 3-Pin, 5V Version (40x10mm, Brown)

https://www.amazon.com/dp/B00NEMGCIA/ref=emc_b_5_t

 

 

If you do not want to solder anything or mount any plugs:

https://www.igo3d.com/original-prusa-hotend-fan-noctua-mk25s-mk3s

 

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 13/07/2020 6:16 pm
KLAUS
(@klaus-3)
Trusted Member
Topic starter answered:
RE: Is either of these noctura fans the same as the OEM part on the MK3

I would have ordered from them but then only ship to EU.

If any one has any links for this fan and cable all set up for mk3, please list them , thanks

Posted : 13/07/2020 8:06 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Is either of these noctura fans the same as the OEM part on the MK3

@bruce-h7

Maybe try this replacement: https://www.printedsolid.com/products/ldo-sunon-fan-mf40100v1-1000c-g99

https://www.ebay.com/itm/Sunon-V1-Hotend-Cooling-Fan-prusa-MK3-MK3s-5V-MF40100V1-1000C-G99-bear-upgrade/324180235480?hash=item4b7aa5d4d8:g:NZYAAOSwRB5c3yVP

https://www.amazon.com/-/de/2-Pack-Bearing-Extruder-Radiator-Printer/dp/B07W5VGVW2/ref=sr_1_1?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=mk3+hotend+fan&qid=1594672241&sr=8-1

 

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 13/07/2020 8:34 pm
KLAUS
(@klaus-3)
Trusted Member
Topic starter answered:
RE: Is either of these noctura fans the same as the OEM part on the MK3

Thank you Karl very helpful!

Posted : 13/07/2020 10:48 pm
Share: