Notifications
Clear all

Identify which model MK3 I have  

  RSS
JK
 JK
(@jk)
Active Member
Identify which model MK3 I have

How to tell if I have MK3 or MK3s?

Napsal : 19/03/2020 3:29 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: Identify which model MK3 I have

Look at the Filament sensor board,if it is standing on it's edge near the filament you have a Mk3 with Laser Filament sensor, 
If it is flat on the top of the extruder housing, with a cover over it, you have a Mk3S

this is a Mk3S with an extra 5 volt LED soldered onto the +5V pin and the Out Pin, on the Filament sensor, to give Immediate indication of the filament sensor status, without fiddling in the LCD Menu's

this is the Mk3S with the MMUv2S sensor stack, and extra LED...   the cover is back in place on this version... 

regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Napsal : 19/03/2020 9:55 pm
JK
 JK
(@jk)
Active Member
Topic starter answered:
RE: Identify which model MK3 I have

mine has collar sticking up for filament feed and tops of two bolts. Does not look flat like yours. So I'm going with MK3.

THanks.

Napsal : 20/03/2020 2:15 am
Share: